G40 G-Charger
Tuning Parts
G-Charger Processing
Mechanical processing of the case parts and the displacement body. Power increasing of ca. 11kW/15PS!
Since the parts of a G-Charger have to work together homogeneously, we only use holistic processing of all parts of the Charger!
G-Charger Processing „RS”, Price: € 279,-
G-Charger Processing „RS-Plus”, Price: € 379,-
The machining „RS-Plus” additionally includes the installation of the belt drive 20mm „RPM” incl. milling out of the fastening plate and the installation of a smaller pulley (recommended size 70, 68, or 65mm).
G40 Pulleys
Pulleys made from aluminium.
Sizes:
60mm, 63mm, 65mm, 68mm, 70mm
Price per piece: € 35,-
G40 Special tooth belt drive made from aluminium
Slip is not possible, better supercharging pressure build up, no loss of power, less loss of drive.
Consisting of:
- Crankshaft wheel
- Drive wheel Lima
- Pulley
- Belt
Price per set: € 231,- currently not available
G60 (N=6000 r.p.m.)
| Tooth Belt Drive (mm) | Teeth | r.p.m. |
|---|---|---|
| 75 mm | approx. 26 | 10.500 |
| 72 mm | approx. 26 | 11.078 |
| 70 mm | approx. 24 | 12.000 |
| 68 mm | approx. 24 | 12.000 |
| 65 mm | approx. 22 | 13.091 |
| 63 mm | approx. 22 | 13.091 |
| 60 mm | approx. 20 | 14.400 |
G40 Cog Belt „RPM” 20mm
Cog Belt 20mm, 2 steel wheels chromated (pitch XL)
Attention: Fastening plate needs to be milled out. The pulley needs to be turned about 11mm.
Price per set: € 59,- currently not available
Price for milling out
the fastening plate: € 25,-
G40 Oil sump „RPM” for Polo
Aluminium oil sump for Polo, for better heat deflection.
Price: € 139,-
G40 Throttle valve part
Changed throttle valve part, without cotters with new valve. Diameter 45mm, changed full throttle switch
(in replacement).
Price: € 49,-
G40 Throttle valve part, maximum processed
Maximum processed throttle valve part, spindelled to 49mm, with new valve, changed full throttle switch
(in replacement).
Price: € 149,-
G40 High power air filter inset
Cotton fabric laminated, higher air passage towards paper, therefore higher engine performance.
(Manufacturer: Kingdragon)
Price: € 59,-
G40 Special Camshaft "Schrick"
Opening square E/A/Spreizung: 252/276/111
Price per piece: € 280,-
G40 Special Spark Plugs „BOSCH” W4CS, W6DPO
Are recommended for performance-enhanced vehicles.
Price per piece W4CS: € 9,-
Price per piece W6DPO: € 18,-
Oil temperature display „racimeX”
Display range up to 140 °C.
Price: € 42,-
Charger pressure display „racimeX”
Consisting of:
Charger pressure display, divided into low -and high pressure range, tubing.
Price: € 42,-
G40 Control box modification
Optimum alloy adoption at using smaller pulleys.
Control box modification standard: € 79,-
For rebuilding to G60: € 99,-
Special design: € 149,-
G40 Large intake stroke bridge
With large diameter, recommended for extreme power increasing.
Price: € 269,-
G40 Exhaust manifold
Price: € 459,-
Camshaft wheel, adjustable
For fine tuning of the control times.
Price: € 82,-
All prices include VAT. Additional there are the cost for postal charges and C.O.D. fees.
Do you have any questions concerning tuning parts? No problem - we are looking forward to answering your questions via eMail, fax or phone.
Please feel free to make your orders as well via phone.
Order online!
